BALEMASTER MODEL 4260G-8 REBUILT DUAL 25HP MOTORS

One (1) Rebuilt Balemaster model 4260G-8 Two (2) 25 HP Motors 8” Main Cylinder Ram Face Pressure: 110 PSI Total Compression Force: 150,900 lbs. Bale Size: 40” x 36” x Variable Hopper Opening: 34” x 40” System Pressure: 3,000 PSI Cycle Time: 25 Sec. The following was performed: 1) Repack all cylinders 2) Clean motors and replace bearings as needed 3) Drain and clean hydraulic tank 4) Steam clean baler 5) Replace liners and floor as needed 6) Replace conduit as needed 7) Replace hydraulic hoses as needed 8) Rebuild wire tier (twisters, cutters, hooks, et....) 9) Replace wire guide rollers as needed 10) Repair frame as needed 11) Replace "O" rings as needed 12) Check all switches, repair, or replace as needed 13) Check photocells and repair or replace as needed 14) Clean, repair or replace controls and push buttons as needed 15) Replace all filters 16) Check pump reseal, repair, or replace as needed 17) Check and replace as needed all fuses and overloads 18) Check, clean, or replace all motor starter contacts 19) Test run baler 20) Paint and new safety stickers.